Originally posted by VilmerX
View Post
Announcement
Collapse
No announcement yet.
Guitar for testing pickups
Collapse
X
-
Originally posted by VilmerX View PostI have thought about the fact that this testing enviroment will not mimic the actual tone when the pickup is mounted the standard way. But my primare goal is to compare pickups relatively.
What do you think is the problem with the tonal aspect?
what i would have done is......................
made an oversized pick up ring. to hold the pup. it would be similar to a pickguard."slappy, slappy" bill sings, happily, as he dick slaps random people on the streets of Cleveland.
Comment
-
I know a musicstore here in the Netherlands (www.voxhumana.nl) Who has a test-strat with sideways sliding electronics. They have some ten or twenty ready mounted scratchplates in store, so it's easy testing.
Comment
-
WilmerX: I personally think your pickup contraption will have a minimal affect on tone (if any at all). The piece of wood that the pickup is mounted to isn't big enough to alter the overall density of the guitar body, and the pickup will pick up string movement, not body vibrations. At the very worst, the wooden block will absorb some vibration and diminish the guitar's inherent sustain.
Comment
-
^ That's why direct-mounted pickups have more sustain and resonance, but not -that- much. imho."It wasn't the world being round that agitated people, but that the world wasn't flat. [ ... ]
The truth will seem utterly preposterous, and its speaker, a raving lunatic."
Comment
-
Originally posted by Sunbane View PostBtw, what guitar is that? Performer series Jackson?Originally posted by VilmerX View PostA would like a guitar where I can test different pickups -sort of like a test bench. I have an old Washburn MG-40 lying around, which already has a swimming poll routing, so I think that a little more routing should make it possible to slide pickups in and out. I just need a simple yet genius way to mount and connect the pickups. Anyone has experienced with this? -or has ideas.Claus.
Comment
-
Originally posted by kelly user View Postdid you tell yourself the answer then ask me about it........
what i would have done is......................
made an oversized pick up ring. to hold the pup. it would be similar to a pickguard.Claus.
Comment
-
Well, you had Dan Armstrong with his plexiglass guitars with the interchangeable pickups, but you were limited to his pickups. In the 80's, Player made an interchangeable pickup guitar with modules which you could load with the pickups of your choice, but they went out of business quickly. Recently, Mercurio guitars made an interchangeable pickup guitar similar to Player, but a better executed design, but that company also met with the same fate as Player. You could look at a surplus electronics store, there sometimes are some quick connect gadgets that would work.
Comment
Comment