A would like a guitar where I can test different pickups -sort of like a test bench. I have an old Washburn MG-40 lying around, which already has a swimming poll routing, so I think that a little more routing should make it possible to slide pickups in and out. I just need a simple yet genius way to mount and connect the pickups. Anyone has experienced with this? -or has ideas.
Announcement
Collapse
No announcement yet.
Guitar for testing pickups
Collapse
X
-
I would think a guitar with a fixed bridge would be better. Then you could route a hole behind the pickup cavity, and just change the pickup from behind.
-
I visited a studio recently and they had a Les Paul from the Woodstock shop in Aarhus, where the pickups could be swapped from behind and connects via ... damn it, I can't remember right now, but it was so simple.
The pickup was in a block of wood and you just pulled the block from the back of the guitar and inserted another block. Very easy. I can check it for ya' next time I visit the studio. The more I think about it.. I think it connects via a 9V battery connector. It connects automatically when you push the block (pickup) in.
Comment
-
Originally posted by jackson1 View PostI visited a studio recently and they had a Les Paul from the Woodstock shop in Aarhus, where the pickups could be swapped from behind and connects via ... damn it, I can't remember right now, but it was so simple.
The pickup was in a block of wood and you just pulled the block from the back of the guitar and inserted another block. Very easy. I can check it for ya' next time I visit the studio. The more I think about it.. I think it connects via a 9V battery connector. It connects automatically when you push the block (pickup) in.Gear:
none
Comment
-
What about using some sort of copper contact tabs. When yo slide the pup in from the back. The box (wood or plastic) wth the pup in it would have corresponding tabs on it that matched the ones on the guitar. There would be no need for a battery. Unless you want to use active pups. But keep in mind the lack of wood in the back of the guitar would lessen the tone significantly. Unless you replace it with a block of wood. Or a hinged compartment or something.
Gil
Comment
-
Thanks for your comments -it gave me something to think about. I still think I will slide the pickup in sideways. As often with svimming pool routings, there is a grove in both sides, see picture.
I think these grooves could be used to fix a block mounted with a pickup.
Now the question is just how should this block look like...
btw using a floyd gives you the opportunity to slacken the strings, and thereby giving you more space to mount the blockClaus.
Comment
-
It seems to me that much wood removal and whatnot would kill whatever tone you're testing for. What about suspending the pup on top of the strings, upside down, and then use alligator clips? Hold it with a modified gooseneck with a soft clamp, and that should do it.
Comment
-
Originally posted by kelly user View Postlooks pretty good, but the tonal aspect of it isn't sound
( hardy har har har)....... looks a bit high, might want to check bridge and string clearance.
What do you think is the problem with the tonal aspect?
Its 2 mm too high, but I put strings on the guitar yesterday, and I have 5 mm from the pole pieces of the pickup to the strings.Claus.
Comment
-
Originally posted by Cygnus X1 View PostIt seems to me that much wood removal and whatnot would kill whatever tone you're testing for. What about suspending the pup on top of the strings, upside down, and then use alligator clips? Hold it with a modified gooseneck with a soft clamp, and that should do it.
I have not removed any wood from the guitar (yet). This is just how it looks without the pickguard.Claus.
Comment
Comment