So I have multiple wires soldered to the pot, but some of them aren't effectively grounding out. So when I figet a wire on the pot, the tone will all of a sudden come through. Visually it looks pretty damn soldered in there. I'm going to resolder everything tomorrow. But before I started I thought I'd ask y'all:
1. Can solder go bad? Could this be the cause of the lack of connection?
2. Do I need new pots? I mean, could the bottom of the pot be the problem?
3. Maybe it's the switch? But I've tried 3 different switches, so I'm doubting that the switch is the problem. But I have soldered, attached, reattached, removed blah blah blah quite a bit.
I don't know. I was going to put some new pots in anyways. Let me know what you guys think. GRACIAS!!!
1. Can solder go bad? Could this be the cause of the lack of connection?
2. Do I need new pots? I mean, could the bottom of the pot be the problem?
3. Maybe it's the switch? But I've tried 3 different switches, so I'm doubting that the switch is the problem. But I have soldered, attached, reattached, removed blah blah blah quite a bit.
I don't know. I was going to put some new pots in anyways. Let me know what you guys think. GRACIAS!!!
Comment