Is there something i can glue into the fret slots (like really thin wood) to fix this without having to glue the frets into the slots? I don't wanna redo this fingerboard
Announcement
Collapse
No announcement yet.
Fret slots too wide for the tang...
Collapse
X
-
Try this....
http://www.frets.com/FRETSPages/Luth...ret4.html#tool
http://www.frets.com/FRETSPages/Luth...nd/badend.html
or a similar tool at Stewmac....
http://www.stewmac.com/shop/Fretting...ng_Pliers.html
Some glue a mix of superglue and wood dust into the slots, then re-cut them. Try expanding the tangs first, unless there is damage to the fret slots, in which case repairs will have to be made anyway.
-
Doh, i had seen that tool before and didn't even remember about it.... thanks for the advice"It wasn't the world being round that agitated people, but that the world wasn't flat. [ ... ]
The truth will seem utterly preposterous, and its speaker, a raving lunatic."
Comment
Comment