Hello all- Just a simple but probably common question. Can a 80's import neck from Model 4 (22 fret, maple fingerboard) work with a new production model San Dimas Style 2 body? Any thoughts or experiences welcome. Thanks Peeps
Announcement
Collapse
No announcement yet.
Vintage 80's Model 4 Neck + New San Dimas Style 2 Body- ANY ISSUES?
Collapse
X
-
-
I'm not so sure about that. I tried to do the same thing and found the Charvel import neck was NOT the correct size for the Pro Mod body. Try it, you can't hurt anything, but for me it didn't work."Got a crazy feeling I don't understand,
Gotta get away from here.
Feelin' like I shoulda kept my feet on the ground
Waitin' for the sun to appear..."
Comment
-
Hey Charvel750- could you elaborate on did not fit? Was the neck too wide to fit in the pocket? I have a PC3 neck that is just slightly wider than most Jacksons and I had to shave both sides a hair to fit a different body and all is well. Or was it an angle or bolt hole issue? Thanks--And sorry about the vertical post-don't know why it did that.
Comment
-
Originally posted by Rich#6 View PostI had no problem putting a promod neck on a model 3 body."Your work is ingenius…it’s quality work….and there are simply too many notes…that’s all, just cut a few, and it’ll be perfect."
Comment
-
Originally posted by SkorpiusX View PostHey Charvel750- could you elaborate on did not fit? Was the neck too wide to fit in the pocket? I have a PC3 neck that is just slightly wider than most Jacksons and I had to shave both sides a hair to fit a different body and all is well. Or was it an angle or bolt hole issue? Thanks--And sorry about the vertical post-don't know why it did that."Got a crazy feeling I don't understand,
Gotta get away from here.
Feelin' like I shoulda kept my feet on the ground
Waitin' for the sun to appear..."
Comment
Comment