Announcement

Collapse
No announcement yet.

Replacement volume knobs that are nice and easy to turn?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Replacement volume knobs that are nice and easy to turn?

    I had to replace the faulty volume pot on my USA SD-1 when I first got it. The pot I bought is pretty stiff and hard to turn with my pinky.

    Are there replacement pots that have a smooth, easy to turn feel, like the stock knobs?
    Last edited by AndyK; 09-24-2010, 09:57 AM.
    '09 Charvel San Dimas USA
    '85 Jackson Soloist w/Floyd
    '98 PRS Custom 22
    '10 Les Paul Traditional

  • #2
    It's really the pot that determines the smoothness of the turn. The knob is just along for the ride.
    _________________________________________________
    "Artists should be free to spend their days mastering their craft so that working people can toil away in a more beautiful world."
    - Ken M

    Comment


    • #3
      Well - the radius of the knob determines how much leverage you're able to put on the shaft of the pot. So a wider knob should be easier to turn than a narrow knob - unless you have girly pinkies that can't generate enough torque.

      Try the MXR-style knobs that are on the EVH - those are pretty wide.
      -------------------------
      Blank yo!

      Comment


      • #4
        Sorry, pre-coffee post!
        I meant the POT! Pots that are easy and smooth, not knobs!
        '09 Charvel San Dimas USA
        '85 Jackson Soloist w/Floyd
        '98 PRS Custom 22
        '10 Les Paul Traditional

        Comment


        • #5
          I think RS has a "superpot" that's been made very easy to turn. Also there's the EVH pot that's supposed to be easy to turn. Not sure if the EVH one is actually out yet. I'll google...
          -------------------------
          Blank yo!

          Comment


          • #6
            Here's one...



            Someone else out there has something...
            -------------------------
            Blank yo!

            Comment


            • #7
              Here's the BS EVH one...

              -------------------------
              Blank yo!

              Comment


              • #8
                Thanks, those EVH pots would be cool, assuming they fit in my Charvel (and my 80's Soloist)?
                '09 Charvel San Dimas USA
                '85 Jackson Soloist w/Floyd
                '98 PRS Custom 22
                '10 Les Paul Traditional

                Comment


                • #9
                  You can get CTS solid-shafts from Allparts that are easy to turn.

                  I have been trying to find a reliable source for the hard-to-turn ones, because on some guitars, you need them (Model series, for example.)

                  You can also disassemble and re-tension the one you have. The difference is in how heavy the grease is and how much pressure the contact puts on the wiper track, you can just bend it a little to tighten or loosen it (but you won't get it as tight as the SD/Jackson pots without the heavy grease, too.)

                  Comment


                  • #10
                    I use the Dimarzio/CTS 500k pots in my ProMods. They are very similar to the RS pots with the bushing clip ring and a nice taper, they turn a lot easier then the stock ProMod pots. I usually give them a shot of Deoxit before installation to loosen them up even more.

                    Comment


                    • #11
                      RS pots are great I love the smooth feel and have some drag to them which is good if you are always hitting the vol knob and turning you guitar down in the middle of a song.
                      Really? well screw Mark Twain.

                      Comment

                      Working...
                      X