Announcement
Collapse
No announcement yet.
Platinum Sparkle touchup paint?
Collapse
X
-
Originally posted by metalhobo View Post
it does not dry hard enough, you're right. but what you can do it put clear lacquer over it.
If you're talking chips, paint mixed with acetone then super glue for finish works great. I've never really thought that guitars that have chips or scratching are something to cover up though, just shows it's been played! Just MO
and if its like my 375 deluxe? good luck
sparkle model 375eluxe.jpgLast edited by john.w.lawson; 10-26-2021, 11:26 PM.
Leave a comment:
-
Yes, to me, the paint is simply for the color-matching aspect. Just enough colored paint to cover the ding and match the original color of the guitar. Then clearcoat (with my preference lately being nail polish topcoat) to provide the hardness and protection for the precious color underneath that is also cooperative when wet-sanding, wet-micromeshing, and polishing.
Leave a comment:
-
Originally posted by DonP View Post
Model paint is enamel. I think nail polish dries harder, but don't quote me. I always thought enamel never got hard enough to wet sand and polish.
Leave a comment:
-
Originally posted by Number Of The Priest View PostI forgot all about model paint. That sounds like a good idea. I used to build model airplanes in my younger days and remember the paints in my Testors kit were a mix of flat/matte, gloss, and metallic/sparkly.
Leave a comment:
-
As long as we are talking about getting our nails done....
they now have gel polish which requires being put under a UV light to cure. <== vs a liquid that needs to dry
I have never done it to a guitar, but I imagine that it would last much longer than other polish and paints.
*also, if you know a nail girl, she can probably match it up real good.
Leave a comment:
-
YES = nail polish. I color matched my old Model 7 Misty (Pink) or whatever color it was with nail polish. I even sold it with the bottle in the case.
Leave a comment:
-
Originally posted by Sanctuary View PostIf you go the nail polish route just don't get caught wearing your girlfriend's panties.
Leave a comment:
-
I forgot all about model paint. That sounds like a good idea. I used to build model airplanes in my younger days and remember the paints in my Testors kit were a mix of flat/matte, gloss, and metallic/sparkly.
Leave a comment:
-
Originally posted by Sanctuary View PostIf you go the nail polish route just don't get caught wearing your girlfriend's panties.
I was gonna suggest going to the hobby store and looking at model paint enamel, but honestly the cosmetics aisle seems probably a better bet for matching colors. good tip.
Leave a comment:
-
If you go the nail polish route just don't get caught wearing your girlfriend's panties.
Leave a comment:
-
NOTP - Thanks for the tips. That's pretty much where I was heading, but was hoping there might be a more clear cut answer. I did find a titanium sparkle nail polish which I've ordered, I'm thinking that I might be able to tint it in one direction or the other to get a match.
Best Regards -
Rich
Leave a comment:
-
I don't have a specific source to suggest, but recommend the following hunts:
1. Walmart, drug stores, Sephora, or any place that sells cosmetics, in search of nail polish that could potentially match or come close to your guitar's finish. Bring your guitar with you and ask women or the sales associates for a second eye on color matching; they seem to have a good eye for colors.
2. Also try any stores that sell automotive touch-up paint. Bonus if it comes in dual pen format where one end is color and the other end is clearcoat, but I find these to be expensive compared to bottles of nail polish and nail clear topcoat.
3. I've seen guitars that were touched up with permanent marker (for example, Sharpie brand) but I doubt you'll find one that has metallic ink to match your metallic finish and I personally prefer one of the two methods above. It might be a different situation if your guitar was a solid color finish.
For the clearcoat, lately I prefer clear nail topcoat instead of the clearcoat that comes with automotive touch-up pens. I find it easier to handle and it blends more smoothly, almost "melting" with the color you apply and with the existing finish.
My experience with touch-ups and blending is only with poly-finished guitars, never nitro, for which I imagine I would need to learn a new method.
Leave a comment:
Leave a comment: