Announcement

Collapse
No announcement yet.

Any amp techs here?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Any amp techs here?

    My 1991 Carvin XT-112 got knocked into and one of the sliders on my EQ broke. I removed the entire EQ module with the intention of replacing the one slider.
    Its an Alpha B10K slider. It has 4 lugs. The internal slider on the board has 2 traces so I assume that means its a dual gang. The problem I have is the size of it. Nothing I could find online anywhere is close to the size of this slider. Its 50mm long, 11mm high, 12mm wide. Center to center for the screw holes (that attach it to the faceplate of the amp) is 45mm. The travel is 30mm.
    I can't find anything close online. I tried all the normal sources and even Ebay. No luck .

  • #2
    Have you tried Carvin themselves? They don't seem to make amps any more, and not sure they even have parts for that, but they do make the new X1 preamp pedal with the sliders which may be the same. https://carvinaudio.com/products/x1
    I feel my soul go cold... only the dead are smiling.

    Comment

    Working...
    X