Where to get a precut Jackson style nut?

[elsmacko]

Hey anyone know a source for a nut that is precut a bit for the way the strings go on the Jackson headstock? The standard Jackson headstock is what I mean.

[MartinBarre]

Do you mean one for a double locking trem type guitar?

If so:

http://stores.shop.ebay.co.uk/azguit...__W0QQ_armrsZ1

Like this one:

[elsmacko]

Oops I should have said; a nut for a standard-style bridge. A strat trem bridge.

[GuerillaPete]

Don't think there is a specific 'jackson nut'. just figure out the material and width and order a pre-cut nut from Allparts or even StewMac.

[MartinBarre]

Yeah, you can get pre-cut nuts from any guitar shop really. You can even find them, unsurprisingly, on ebay.

[Grandturk]

Look for "Gibson-style" nuts:

http://www.stewmac.com/shop/Nuts,_sa...sq_XL_Nut.html

[elsmacko]

Look for "Gibson-style" nuts:

http://www.stewmac.com/shop/Nuts,_sa...sq_XL_Nut.html

I was told that because the way the uning pegs are on the headstock, that the nut should be cut in a way that some of them are slightly angled, not all stright like the gibson nut.

So in other words the top 2 strings cut a little angled and the bottom 2 also, and the mddle stay straight.

I was told that otherwise it could cause tuning issues. Cause it to go out of tune I awas told.

True or not?

[Axewielder]

A good luthier should be able to make one for around $75 or so that will fit better than a stock one.

[elsmacko]

A good luthier should be able to make one for around $75 or so that will fit better than a stock one.

Well my friend would do it for about $40. Let me ask, is there any way I cnan just use a precut gibson nut? I mean that's what people here were saying, so anyone here really know?

If I can buy a precut nut for $10 and glue it non myself, that beats spending $40-$75.

Because I want to sale this guitar, I want to spend as little as possible, as long as it ends up being playable of course.