Announcement

Collapse
No announcement yet.

pup tech advice sought

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • pup tech advice sought

    I've decided to upgrade the pups in my Soloist AT.
    I'm going with a neck SD SH-1 1959 and an SD SH-13 Dimebucker in the bridge.

    What do I need to know to install these?

  • #2
    Is it 1 volume, 1 tone, & 3-way switch? Here's the Duncan diagram for that layout:

    http://www.seymourduncan.com/support...ic=2h_1v_1t_3w

    Your SH-1 probably isn't 4 conductor, so there won't be a red & white wire to solder together for that one. If you need soldering tips, there's a tutorial here:

    http://www.jcfonline.com/forums/show...5&postcount=16

    Comment


    • #3
      You can get the 59 in both 2 conducter and 4 conducter wiring. Just follow the wireing schematic that comes with the pups and you shouldn't have any issues.
      Gil

      Comment


      • #4
        Originally posted by dg View Post
        Is it 1 volume, 1 tone, & 3-way switch? Here's the Duncan diagram for that layout:

        http://www.seymourduncan.com/support...ic=2h_1v_1t_3w
        It is vol/tone/3-way switch. Thanks for the diagram.

        Comment

        Working...
        X