Announcement

Collapse
No announcement yet.

Adjusting truss rod in RX10D

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Adjusting truss rod in RX10D

    I am getting a buzz in the lower frets of my RX10D. So I'm trying to loosen the truss rod to get rid of the backbow. I got the truss rod cover off. The thing is I've made quite a few turns (the truss rod turns easily) on the truss rod so far and the buzz is still there. I didn't want to make too many turns on it in one day. Is it normal for it to sometimes take a few turns on the truss rod until there is enough relief?

  • #2
    Re: Adjusting truss rod in RX10D

    I do not know, but from what I have read/heard..a trussrod adjustment should be done in 1/4 turn increments. But I have never done one, and cannot say I am right...I just know I read or heard that somewhere.

    Comment


    • #3
      Re: Adjusting truss rod in RX10D

      Well I've been doing it in 1/4 turns, but it seems like it is going to take quite a few of them to get rid of the backbow.

      Comment

      Working...
      X