Req: wiring diagram J90c 2 J200's

[Razor X]

I just got a Jackson SL Pro with a bit of messed up electronics. Does someone here got a wiring diagram for a J-90c and two J-200's without the JE-1200. This is a just temporary solution, I'm going to order a x2n and 2 fast track 2's asap.

Thanks [img]/images/graemlins/headbang.gif[/img]

[Newc]

Re: Req: wiring diagram J90c 2 J200\'s

Standard 5-way or the Jackson Special 5-way (it's easy to spot - it's got a billion prongs on it [img]/images/graemlins/laugh.gif[/img])

[Razor X]

Re: Req: wiring diagram J90c 2 J200\'s

It's a std 5-way

[Newc]

Re: Req: wiring diagram J90c 2 J200\'s

Ok, now is it a Fender style with prongs on either side of the switch or are there 8 prongs all on one side? [img]/images/graemlins/laugh.gif[/img]

[Razor X]

Re: Req: wiring diagram J90c 2 J200\'s

Hehe, it has 8 prongs all on the same side. 1 volume (500k) 1 tone (500k)

[Newc]

Re: Req: wiring diagram J90c 2 J200\'s

Cool.

You only need 4 of those prongs. The other 4 prongs are "spares", basically.

Ok, so the prongs go like this:

-
-
-
-
- Output
- Bridge
- Middle
- Neck

I think [img]/images/graemlins/laugh.gif[/img] You might have to swap the Bridge and Neck wires, but that should be it IIRC.

[Razor X]

Re: Req: wiring diagram J90c 2 J200\'s

Thanks Newc [img]/images/graemlins/headbang.gif[/img] , the J-90c has a green, naked, black, white and a red wire. I think the green and the naked one need to be connected to the volume pod, and the black & white on the switch but where do I have to connect the red one? (the J-90c came from a Charvel fusion+ with a special J-0005 5-way)

[Newc]

Re: Req: wiring diagram J90c 2 J200\'s

The red and white go together (as coil taps), the black by itself on the switch. Jackson's pickups have the same wiring color codes as Duncans. You can swap the green for the black to put it in or out of phase with the other pickups.

[Razor X]

Re: Req: wiring diagram J90c 2 J200\'s

I see thanks, is it a bit like this <font color="red">Diagram</font> from Seymour Duncan?

[Newc]

Re: Req: wiring diagram J90c 2 J200\'s

Yup.

[Razor X]

Re: Req: wiring diagram J90c 2 J200\'s

I just finished soldering and it worked out quite well! Thanks Newc [img]/images/graemlins/headbang.gif[/img]