Announcement

Collapse
No announcement yet.

frozen floyd saddles...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • frozen floyd saddles...

    I got a schaller trem in the mail today (the rest of the guitar should arrive tomorrow!) and 5 of the 6 floyd saddles were seized up. I soaked them in WD-40 for about 8 hours or so and was able to free up 2 more. The other three are still pretty bad, but do move slightly. They are soaking in liquid wrench right now-what is my next course of action if that doesn't work?

  • #2
    Re: frozen floyd saddles...

    Maybe try putting a cloth around them and smacking them with a hammer and a screwdriver?
    I feel my soul go cold... only the dead are smiling.

    Comment


    • #3
      Re: frozen floyd saddles...

      <font color="aqua">Hey there Andy, if ya don't get them loose you could send them to me and I can toss them in an ultrasonic cleaner. Works very well. </font>
      Dave ->

      "would someone answer that damn phone?!?!"

      Comment


      • #4
        Re: frozen floyd saddles...

        I leave em in for weeks, if not months sometimes if they are not flaking plate to badly.

        Comment


        • #5
          Re: frozen floyd saddles...

          Well, I got them freed up a bit. I had to use a toothpick and scrape the crud from the hinges! Then I had to use the spray WD-40 witht he little tube attachment to shoot out the rest of it. Is there a way to remove the pin that holds the saddle together with screwing up the saddle permanently? you can see quite a bit of rust around the edges of the pin so I'm thinking there is alot of crust built up in there.

          Comment


          • #6
            Re: frozen floyd saddles...

            another little trick is to use come carburator cleaner.
            I only do that in extreme situations. It may eat of some of the color on the trems tho...

            Comment

            Working...
            X