Announcement

Collapse
No announcement yet.

Wiring.......

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wiring.......

    How do I wire 2 nuetrik jacks together to make a kind of guitar cable extension?

    I have the 2 female jacks mounted in a rack panel and a chassis hooked to that panel so I want to basicall make a little patch bay, signal in the front and out the back.

    The jacks have Ring Tip and sleeve tabs on them, but would I use all 3 without haveing the jacks stereo.

    I just want to plug my conections from my wha peadal into the panel on the front of the rack and have the cables comeing out the back into the rest of my gear.

    The conections on the back are gonna stay wired in ther though.
    So which tabs would I use to wire the jack and which one gets used for ground, or does it matter.

    I know this sounds like a big mess and I hope someone can figure it out ,cause I have made it sound a LOT harder than it is [img]/images/graemlins/grin.gif[/img]
    Madness Reigns......... In the Hall of the Mountain King!

  • #2
    Re: Wiring.......

    I'd use the sleeve for the ground, tip for signal and leave the ring disconnected.

    Comment

    Working...
    X