Tweet
I have a guitar with Schaller locking machine heads. Standard button.
I ordered some Schaller knurled barrell knobs...had to get them from Germany and they took a long time to arrive:
https://www.schaller-electronic.com/...0d1cbb80XY530a
I removed the old buttons; they have a much shorter mounting screw. The new ones have a longer mounting screw.
The problem is that the screw is just barely long enough. And there's some play between the screw shaft and the inside of the barrel. So when I place the barrel knob on the mounting shaft, the mounting screw wiggles around a bit and it's near impossible to get it in the hole. I say near impossible because I was able to mount 3 of the knobs after a lot of trial and error.
Anyone know the mounting screw size for Schaller buttons? Can't find it in any schematic.
Any tips for this? I tried to place the old buttons back on and I have the same issue; it's super hard to get the screw into the hole.
I'm thinking if I can get a slightly longer screw it'll be easier to mount.
I ordered some Schaller knurled barrell knobs...had to get them from Germany and they took a long time to arrive:
https://www.schaller-electronic.com/...0d1cbb80XY530a
I removed the old buttons; they have a much shorter mounting screw. The new ones have a longer mounting screw.
The problem is that the screw is just barely long enough. And there's some play between the screw shaft and the inside of the barrel. So when I place the barrel knob on the mounting shaft, the mounting screw wiggles around a bit and it's near impossible to get it in the hole. I say near impossible because I was able to mount 3 of the knobs after a lot of trial and error.
Anyone know the mounting screw size for Schaller buttons? Can't find it in any schematic.
Any tips for this? I tried to place the old buttons back on and I have the same issue; it's super hard to get the screw into the hole.
I'm thinking if I can get a slightly longer screw it'll be easier to mount.
Comment