Announcement

Collapse
No announcement yet.

Wiring help!! How to hardwire emg ??? With these components??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wiring help!! How to hardwire emg ??? With these components??

    Single emg , single alpha pot to stero Jack.

    IMG_20160910_135423.jpg


    What's this tab on the top part of the alpha pot? What goes there

    IMG_20160910_145639.jpg
    I know the old saying that the value of an opinion is generally inversely proportional to the strength with which it is held.

  • #2
    red on battery plug to red on pick up. shield to ground. center wire to 1 of the volume pot outer legs. center pot leg to jack tip connection. other outer leg to ground. black on battery plug to ring connection on jack. sleeve connection on jack to ground. I think that extra tab on the pot may be a ground solder point maybe.

    Comment


    • #3
      Originally posted by paranoid View Post
      I think that extra tab on the pot may be a ground solder point maybe.
      Yeah, test the continuity between the tab and the body/back of the potentiometer. It's much easier to solder onto a tab than onto the back.

      Comment


      • #4
        That tab looks like it would get in the way when mounting the pot in the guitar though.

        Comment


        • #5
          That extra tab is for locking the pot in position inside the cavity. Designed for slippage prevention. Not a good idea on guitars. Snap it off with some pliers.

          Comment


          • #6
            Make sure the pot is 25K or 50K ohms or you will have problems.

            Comment

            Working...
            X