J90c split coil wiring

[miketyson]

Hey!
I've goy Soloist with just one pickup at the moment - Jackson J90c.
Can you help me with wiring? I've got 1 volume knob and separate split-coil?

cheers

[charvel750]

So wire the red wire to the volume far left lug. Then ground the bare and the black. Then wire the green and white to the split switch. That's the basic set up.

[miketyson]

http://www.sure-electronics.net/DC,I...-CO045_3_b.jpg this is my switch

[charvel750]

OK, so on that switch, one lug at either end is the "ground" so connect it to the volume knob's ground. Then connect the pickup's green and white wire to the middle lug of the switch. Connect the red wire of the pickup to the volume pot's left lug, and then from the volume pot's center lug to the output jack. That will get it wired up.

[miketyson]

it works thanks!

[charvel750]

Great! That's a versatile set up for sure.