PDA

View Full Version : which size truss rod wrench for jackson jdr 94???



Bigfknbang
08-13-2012, 05:39 PM
hey guys baught a jdr 94 neck and body off a dude here a couple years ago and finally got around to getting it together :Headbang: got the pickups and trem in. neck is on, new tuners, painted the body. i don't have the truss rod wrench to fit it:Angry1: lol. that sux! all my other guitars use allen wrenches for the truss rod. so i'm going to order one but i don't know which size to order. i google searched it and got a bunch of different answers:eek: help me out i'll post a vid when it's done:). its a Truss Rod Hex Box Wrench acording to all the ebay listings just need to know the size.

Bigfknbang
08-13-2012, 05:44 PM
https://www.facebook.com/photo.php?fbid=3667352882427&set=a.1888742698284.2091839.1232958718&type=1&theater

plon
08-13-2012, 07:07 PM
It's 7mm. Here's one for Ibanez but will work for yours. http://www.ebay.com/itm/Ibanez-7mm-pipe-truss-rod-wrench-/170732606002?pt=Guitar_Accessories&hash=item27c074d232

Bigfknbang
08-14-2012, 02:25 PM
thank you:) it's going to rock \m/\m/

silar
08-15-2012, 09:49 AM
You can send an e-mail to Jackson and they will send one to you for free. Just tell them that you need the 7mm socket truss rod wrench and not the Allen wrench. I saw a post or two on here where forum members tried it, so I did too.. Got one in the mail!

cullenszoo
08-15-2012, 10:19 AM
I like the idea of getting free one from Jackson but I can't find a link on their site to request one.

I picked up a real cheap socket set from the Dollar General store. Like $5 and used the 7mm socket to adjust mine.

j2379
08-15-2012, 10:30 AM
yeah i could use a real one from Jackson, Ive found the best thing is a high quality 10-12 in one screw driver. I say high quality because those have a thin enough wall to fit between the nut and the route, and are also strong enough not to crack. & i thought it was 1/4" not 7mm (or are they the same).


I like the idea of getting free one from Jackson but I can't find a link on their site to request one.

I picked up a real cheap socket set from the Dollar General store. Like $5 and used the 7mm socket to adjust mine.

silar
08-15-2012, 01:04 PM
I like the idea of getting free one from Jackson but I can't find a link on their site to request one.

I picked up a real cheap socket set from the Dollar General store. Like $5 and used the 7mm socket to adjust mine.

Send an e-mail to consumerrelations@jacksonguitars.com

That's what I did, including my home address. Got a reply a few days later that it was in the mail!

Bigfknbang
08-15-2012, 07:28 PM
sent jackson an email :)

Bigfknbang
09-04-2012, 03:03 PM
jackson sent me the nut wrench for free:) also put a dimarzio steve vai gravity storm neck pickup and gfs crunchy rails bridge humbucker in it:) \m/\m/