model series nut question

[Carbuff]

I have a model series neck that is missing the nut. I had heard that one from a les paul would fit right. Will this one work?

http://www.ebay.com/itm/300751570433...=p5197.c0.m619

[DonP]

Should work fine. You would only need to sand down the underside to get the correct action.

[Carbuff]

Cool, thanks.

[straycat]

You will need to angle the nut slots a little.

[Hellbat]

Go here...

http://www.graphtech.com/products.html?SubCategoryID=8

and measure the current nut to make your life easier. If you get the wrong width/depth it will make the replacement a lot more smooth.

You can try to PM GraphTechGray if you still have questions after measuring. I don't know how often he checks in here though.

[Carbuff]

Unfortunately, the current nut is missing. As long as the basic dimensions are correct, Im ok with having to tweak it a bit.

[warlok]

Just to add in case you didn't get one yet, I put a Black TUSQ XL PT-6010-00 on my Model 6 and all I had to do was sand the bottom and sides to fit. Slots are more angled on that one and no adjusting of the slots was needed.