Tweet
so i have 2 singlecoils and one humbucker, which all come from the same set.
the pickups are active and they come from an old vester guitar.
the config looks exactly like on this charvel model 6
http://www.dessherwood.co.uk/charvel2.jpg
inside the cavity there are 2 normal pots, which i think are tone and the one thats "making the pickups go active"
there is also one pot that has some kind of chip attatched to it. it looks like this: http://www.speedyshare.com/files/24334702/IMG_1038.JPG
the pots and all are heavily damaged, and the pickups does not have any wires, they have been cut off for some reason.
can this be repared? will i need that volumepot chip from another vester or can i just use some EMG-ish and just solder the vester pickups on?
the pickups are active and they come from an old vester guitar.
the config looks exactly like on this charvel model 6
http://www.dessherwood.co.uk/charvel2.jpg
inside the cavity there are 2 normal pots, which i think are tone and the one thats "making the pickups go active"
there is also one pot that has some kind of chip attatched to it. it looks like this: http://www.speedyshare.com/files/24334702/IMG_1038.JPG
the pots and all are heavily damaged, and the pickups does not have any wires, they have been cut off for some reason.
can this be repared? will i need that volumepot chip from another vester or can i just use some EMG-ish and just solder the vester pickups on?
Comment