Coil-Tap on DK2 help

[bobafer]

Hi, I have another DK2, HSS config, 1 vol, 1 tone, 5 way switch. I would like to know how to coil tap the bridge pickup using a push/pull pot on the tone pot position if possible. If not, in the volume pot position.

Help would be really apreciated

[max]

There should be diagrams for that on the seymour duncan website ->
http://www.seymourduncan.com/support/wiring-diagrams/

[max]

The mods you are trying are actually somewhat on the lame side of things. In my experience the more useful mods with a push pull would be:
-bypassing the tone pot
-bypassing all pots (direct out)
-switching the humbucker between series and parallel
-muting the guitar (standby/kill switch)

[bobafer]

Well thanks for the tip max, good to know that. I'm sort of beggining in this stuff.

[DrJackson]

if you get a Fender SuperSwitch and a push-pull pot you can split all the pickups at the same time (like the S1 switch does) so you can get a HSS or a S-Ss-Ss configuration

you can too use your tone pot not as a TONE-pot, but as a MIX-pot between the Neck and Bridge pickups for example