Announcement

Collapse
No announcement yet.

Charvel model 6 new pickup wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Charvel model 6 new pickup wiring

    I have a charvel model 6 skeleton i got. All it had in it was the 3 on/off toggles. So i bought a dimarzio tone zone for the bridge and a Air Norton s single coil for the neck and i'm putting nothing in the middle. both pickups have 4 wires. I have never wired a guitar with on/off switches before so looking for a wiring diagram to do this. I've looked around the internet can't really find anything. s/h 4 wires 1 volume 2 tones and 3 on/off switchs i guess only 2 really need to be wired. Any help would be greatly appreciated.

  • #2
    Check Dimarzio's site. They've got ton of wiring diagrams. Basically, you're going to have two wires together and taped off, the bare and one sent to ground, and then the other to the switch (middle pole), and the bottom pole on the switch out to the volume pot.
    -------------------------
    Blank yo!

    Comment


    • #3
      See this thread:


      http://www.jcfonline.com/forums/showthread.php?t=97742

      Comment

      Working...
      X