Announcement

Collapse
No announcement yet.

dk2m neck question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • dk2m neck question

    Will a dx10d body fit a dk2m neck? Says it will accomadate a 24 fret 25.5 scale neck with 2.25 neck width .Lookin to buy the body if it will fit. Thanks .

  • #2
    I'm sure it will, but don't take my word for it, someone like Newc will surely chime in with a definitive answer forthwith.
    http://www.amazon.co.uk/Steven-A.-McKay/e/B00DS0TRH6/

    http://http://stevenamckay.wordpress.com/

    Comment


    • #3
      It should. There may always be some light sanding or shimming to get it to fit.

      Comment


      • #4
        Exactly, I posted about swapping a DK2 neck onto my KE3 and vice versa. I had to do a fair bit of sanding to get the KE3 neck onto the DK2, but it went eventually.
        http://www.amazon.co.uk/Steven-A.-McKay/e/B00DS0TRH6/

        http://http://stevenamckay.wordpress.com/

        Comment


        • #5
          As long as they are from the same general time frame, you should have no trouble.

          I put a recent DKMG (piranha) neck on a 2003 WRXT body and the pocket opening was as wide as the neck heel, and since 2 objects cannot occupy the same space at the same time, I had to sand about .05" off the side of the neck heel to get it on.
          I want to depart this world the same way I arrived; screaming and covered in someone else's blood

          The most human thing we can do is comfort the afflicted and afflict the comfortable.

          My Blog: http://newcenstein.com

          Comment


          • #6
            ok thanks great info. not to be a pain but will this one work too?
            http://cgi.ebay.com/Jackson-guitar-b...3A1%7C294%3A50
            I emailed the guy about what is it but got no response. thanks once again

            Comment

            Working...
            X