Announcement

Collapse
No announcement yet.

Saddle mounting screw for Schaller JT590?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Saddle mounting screw for Schaller JT590?

    hello- Will these fit my Schaller JT590....

    http://www.stewmac.com/shop/Bridges,...and_Parts.html

    I thought that OFR's and most others (JT580LP) used #4-40 screws and that
    Schaller used #4-48. So will these fit? It says it will fit OFR and Schaller Floyd Rose

    thanks, Karl

  • #2
    I believe they're all #4-48. Anyway, just to be sure they're the same, I took one out of a JT-590 & it fit an OFR baseplate. Budman has them listed as fitting OFR, Schaller, & JT-6. 6 for $2, btw, and most importantly no high minimum order or crazy minimum shipping charge.

    http://www.fretsonthenet.net/hardware.htm
    Last edited by dg; 08-10-2006, 01:11 PM.

    Comment


    • #3
      I recently replaced these on my Schaller made Hamer trem (same as the 590) If you have a good hardware store around just go and buy M3x8mm socket head screws. They had them at my local hardware store and they are exactly like the originals. I still need a lock screw for the string block so I will need to get that from Budman....
      Damn this is an expensive hobby.....

      Comment

      Working...
      X